Posts Tagged ‘Xbox power supply overheats’

Xbox Repairs – How To Unstick A Game With Help From A XBox360 Repair Guide

Friday, July 17th, 2009

It can be highly intimidating having a game of yours get stuck in your Xbox 360 system. The natural reaction is to freak out and try to tear it out. It’s clear that you could take it into a repair shop, perhaps even a Microsoft repair facility to have them help you with it. Although, if you find you are short on cash, you can easily remove the disk on your own; you need to download and Xbox 360 repair guide for the best chance at fixing it yourself.

With step by step guidance, you can get the disk out all by yourself.  The first thing your Xbox 360 repair guide will tell you to do is unplug the power for a few minutes while allowing your Xbox to reset. Once you have allowed the unit to reset itself, go ahead and plug it back it.  See if this step alone worked.

Now things will get a little more complicated making it essential you follow each step in your Xbox 360 repair guide closely. Next you will remove the face plate on the console while grabbing a thick paper clip or something similar and straighten one end of the paper clip.  Once the fact plate is off, you should see two small holes beneath the DVD player and then one hole to the right.

The next step you take will depend upon which of three DVD drives was installed in your Xbox 360. If you own the Samsung or Toshiba brands, your guide will step you through finding a small hole on the right underneath an ‘X’ on the DVD drive faceplate.  Take your straightened paper clip or the small piece of wire and push it into the hole until it hits the gear.  The gear you are touching with the clip, needs to be spun left to right. You need to continue pushing on it, gently, until you feel it move.

If you purchased the Hitachi DVD drive, you will want to poke the clip into the first hole on the left. Follow the same procedures that are listed above by poking the hole to get the gear to move. No matter what type of DVD drive you have, it is critical that you take your time and not push into the hole too hard.  If you miss the correct spot you can do more damage than good.

As soon as the tray starts to eject you will be able to pull on it slightly to help it open. Once you have the tray open, remove the game.  Thanks to your Xbox repair guide you just saved hundreds of dollars.

Xbox360 3 Red Lights – What Steps To Take To Fix It Fast

Related Articles:

    Advisory: The product links on this web page are affiliate links. In no case does my earning a commision cause you to pay extra for a product purchase.

    Post Footer automatically generated by Add Post Footer Plugin for wordpress.

    Technorati Tags: High Temperature, Power Supply Unit, Xbox power supply overheats, Xbox Repair Center, Xbox Repair Manual, xbox repairs

    Xbox 360 Power Supply – Don’t Take Your Xbox 360 For Repair Until You Read This

    Thursday, June 25th, 2009

    Just as with other gaming consoles, the Xbox 360 can be susceptible to problems. But, what if it is a quick adjustment you can make to your power supply? A situation gamers fear is the three red lights coming up; they dread it. This happens when three lights flash red on the Ring of Light on the front of the Xbox game console. Following is some help with Xbox360 3 red lights repair when your power supply is red.

    From time to time you may find that the light on your Xbox 360′s power supply will turn red or be completely shut off. There can be many reasons for this. One thing is certain, the external power supply has sensed a fault somewhere.

    The power supply has several built-in safeguards to help you and your system prevent damage to the console and the power supply itself. It’s good to know that, the power supply will turn itself off when there is too much current, when the voltage is too high, or when the temperature of the power supply is too high. If any of these conditions are present, the light goes to red or shuts off all the way.

    So what Xbox repair techniques can you try out? The first matter you need to look into is whether or not the power supply unit is cool. The red lights you have observed could be an indication that the power supply is too hot. If the unit is too warm or even hot, let it cool for a few hours. Be sure to turn off the entire system and do not risk turning it on again until the power supply has cooled down. Once you find it has cooled back down, the power supply light should go from red to orange; you can turn your game console on again at this point.

    One quick and basic repair method is to check that the power supply is properly plugged in. If it is plugged into an extension cord, surge protector, or power strip, the amount of voltage may not be correct. Try plugging the power supply directly into a wall outlet, if this is your case.

    If you do have another power cord and supply unit, try testing your console with this. If the game console does not power up, unfortanately, the issue is with the console itself. If one of these three Xbox 360 power supply fixes doesn’t get you up and running, you are likely going to have to have your system fixed.

    If you are still convinced you can fix your Xbox 360 power supply yourself, visit: XBOX Repair Guides Reviewed for more self repair ideas.

    Related Articles:

    Advisory: The product links on this web page are affiliate links. In no case does my earning a commision cause you to pay extra for a product purchase.

    Post Footer automatically generated by Add Post Footer Plugin for wordpress.

    Technorati Tags: High Temperature, Power Supply Unit, Xbox power supply overheats, Xbox Repair Center, Xbox Repair Manual, xbox repairs